Transporting The Work Platform; By Crane; By Forklift; By Truck - Upright MX19 Manual Del Usuario

Transporting the Work Platform

T
RANSPORTING THE
B C
Y R A N E
Secure the straps to Tie Down/Lifting D-Rings only.
B F
Y O R K L I F T
D A N G E R
!
Forklifting is for transport only.
See specifications for weight of work platform and be certain that forklift is of adequate capacity to lift
the work platform.
The MX19 may be forklifted from the rear end of the machine between the wheels.It can also be forklifted
from the side using the forklift pockets shown in the diagram.
B T
Y R U C K
Maneuver the work platform into transport position and chock the wheels. Secure the work platform to the
transport vehicle by attaching chains or straps of adequate load capacity to the Tie Down/Lifting D-Rings.
C A U T I O N
Overtightening of the chains or straps attached to the Tie Down/Lifting D-Rings may result in damage
to work platform.
Operation Manual
All manuals and user guides at all-guides.com
W P
ORK LATFORM
!
Forklift
Figure 6: Transporting the Work Platform
Forklift
Pockets
Tie Down/Lifting D-Rings
Located At Each End
Page 11