Selecting The Operating Mode, Setting The Rotational Speed And Torque And Starting Measuring - Festo TP1410 Instrucciones De Utilizacion

Servo brake and drive system

9.4 Selecting the operating mode, setting the rotational speed and torque and starting measuring

Selecting and setting
Selections and settings are made with the rotary knob (pos. 9, see chapter "Setup").
•
Turn  The arrow is moved one line up or down.
•
Press  The selection is confirmed. As a result, you either go to the next display or a numerical value
can be set with the rotary knob.
1
5
Overview of the screens on the display of the test bench
68
2
3 4
© Festo Didactic 8121048