Mainstays MS61100016716 Manual De Instrucciones página 6

• Assemble the Blade Unit onto the Cup (ill.
undamaged. Ensure a tight and secure fit. Do not overtighten.
• Turn the Cup with the Blade Unit facing down and place it onto the Motor Unit (ill.
Ensure the tabs on the Cup are aligned with the recesses on the Motor Unit.
• Push down on the Cup with Blade Unit and rotate clockwise until it locks in place (ill.
• Connect the plug into a wall outlet (ill.
NOTE:
- Do not blend dry ingredients.
- Do not use the appliance more than 1 minute for
each operation cycle. Allow the appliance to cool
down for at least 3 minutes between operation
cycles.
WARNING:
- Always ensure there is food in the Cup before
using the appliance.
- Do not use the Cup to blend hot liquids or foods.
- Do not overfill the Cup to avoid spilling or food entering the Motor Unit.
- Do not use the appliance without the Cup and Blade Unit.
• Press the POWER/PULSE Button to start the operation.
NOTE:
- Press and hold the POWER/PULSE Button at any time to bring the motor to maximum
speed. Release the POWER/PULSE Button to stop the operation.
WARNING:
- Never attempt to remove the Cup from the Motor Unit during operation.
- Do not operate the appliance continuously for more than 1 minute. Do not operate
the appliance without load.
- Allow the appliance at least 3 minutes to cool down between operation cycles.
Operate the appliance for a maximum of 3 consecutive cycles, after which, allow the
appliance to cool down for at least 20 minutes before the next use. Do not exceed the
maximum operation cycles.
Blender_MS-160ZPSBLD_US_IM_V4_200507.indd 6
). Ensure the Seal Ring is present and
e
f
).
h
6
f
g
h
5/7/20 11:36 AM
•
).
•
g
).
•
•
•
•
•
•
•
•
•
•
•