THOMSON 32WS95EF Manual De Instrucciones página 8

ACC908-17L.qxd 21/02/02 18:43
Wall mounting bracket for Plasma screen
Before starting
EN
EN
• We recommend that your distributor carries
out its assembly.
• However, if you decide to assemble it yourself
and fasten it to the screen, request the
assistance of another person since the screen
is heavy and requires delicate handling.
• Before any of these operations, we strongly
recommend that you read about the various
precautions that need to be taken during
assembly. These apply both to your safety and
that of the screen. A full reading of these
instructions is recommended. After assembly,
keep these instructions in case you need to
refer to them in future.
Composition of the assembly kit
Left
(for fastening to the back of the screen)
Page 8
All manuals and user guides at all-guides.com
Bolt 6x14
Wall mount and its bolts
(for wall mounting)
Bolt 5x20
Right
Screen retainer bars and bolts
Cable clips
Principle and characteristics
• This wall mount system is intended for the wall
mounting of 32WS95EF and 32WS95UF
plasma screens.
Reference No.
Weight
Dimensions (mm)
Tilt adjustment
201
60
Dimensions in millimetres
In our efforts to improve the quality of our
products, we reserve the right to change their
features. The information contained in these
instructions are therefore liable to change and
are not contractual.
THOMSON multimedia
responsible if the player is not used according
to this manual.
8
: ACC 908
: 5,5 kg
: 650 x 471 x 60
(201 maximum)
: from 0° to 20°
5° per position
5 positions
Fixing holes
20
300
500
600
650
shall not be