Reinstalling The Headlight Housing; Replacing The Headlight Bulb Or The Pilot Lamp - SHERCO 125 SE RACING Manual Del Proprietário

ELECTRICAL SYSTEM MAINTENANCE

REINSTALLING THE HEADLIGHT HOUSING

3

REPLACING THE HEADLIGHT BULB OR THE PILOT LAMP

136
1 2
1 3
2
Connect the electrical connector.
Engage the light plate, ensuring that the holes in the
plate are in place
1
2
Place all of the brake hoses / cables in the interior of
meter upper guide .
3
Attach the rubber fastners.
Check the setting of headlight beam.( p.137).
Remove the headlight housing assembly ( p.135)
Remove the protective rubber
Turn the socket a quarter turn counterclockwise to
remove it from the headlight assembly.
Gently press the bulb in while turning it counterclockwise
and remove it from the socket.
Install a new bulb .
2
Headlight bulb S2
Reinstall the socket with the bulb in the headlight
assembly by turning it in a clockwise direction.
Reinstall the protective rubber.
To replace the pilot light
from the reflector .
3
Pilot light W5W
Reinstall the headlight housing assembly.
.
.
1
12V 35/35W
simply remove the socket
1
12V 5W