Main Menu Overview - Hach AS950 Manual Del Usuario

Color Status Description
Red Error The controller is on. One or more of the measurements the sampler is configured
to use (e.g., pH and flow) is not available. Refer to
Green No Error The controller is on. There are no errors.

4.2 Main menu overview

Table 3 shows the main menu options.
Option
Programming
Review Data
Manual Operation
Calibration
Export/Import
Hardware Setup
Diagnostics
General settings
Table 2 Indicator light description
Table 3 Main menu options
Description
Configures data logging, the alarms and the sampling program.
Shows the sampling history (e.g., samples collected and missed samples).
Shows the measurement data (the data log).
Collects a grab sample, moves the distributor arm to a selected bottle position
or operates the pump in the forward or reverse direction.
Calibrates the sample volume, the attached sensors and the analog input (for
flow pacing) at the AUX port, if applicable.
Saves measurement data, sample history and program settings to a memory
stick. Copies the program settings from a memory stick to the sampler.
Configures the sampler, sampler ports and attached sensors. Configures and
calibrates the liquid detector.
Shows the Status screen, event log, alarm log and memory use. Shows the
status and configuration of the AUX I/O port. Shows the cabinet temperature
(AWRS sampler only). Completes a diagnostic test of the attached sensors,
distributor arm, keypad and display. Shows the total run time, forward run time
and reverse run time of the pump motor.
Shows the instrument information (e.g., serial number). Configures the display
settings (e.g., language, date and measurement units). Configures the
security settings. Configures the tubing life reminder setting. Erases the
sampling history and/or the selected logs.
Troubleshooting on page 25.
English 5