KERR Ultra-Waxer 2 Instrucciones De Uso página 3

Thank you for purchasing the new Ultra-Waxer 2, the most
advanced electronic waxing pen of its kind. The Ultra-
Waxer has been the industry standard for dental laboratory
applications for decades.
Features
• Comfortable color-coded cushion grip tips
• Four programmable temperature presets
• Quick Heating of tips
• Dual pens for simultaneous use
• Adjustable Auto Off
• Dual Voltage
• Temperature Range: 97°F to 500°F (36°C to 260°C)
1. Specifications
Height: 3.25" (8.26 cm)
Width: 7.5" (19.05 cm)
Depth: 7" (17.78 cm)
Weight: 1.6 lb (0.726 kg)
Electrical Rating:
100/240 Volts, 1.0 Amps,
30 Watts, 50/60 Hertz
Ambient Temperature:
41ºF (+5ºC) to 104ºF (+40ºC)
Relative Humidity: 80% Max
Altitude Limit: 2000 meters
Installation Category II
Pollution Degree 2
Indoor Use Only
Mains supply voltage fluctuations not to exceed 10 percent
of the nominal supply voltage
2. Package Contents
Power Unit (1)
Ultra-Tips #35167 (1), 35168 (1)
Ultra-Spatulas #35177 (2)
Power Cord US Plug #34849 (1)
Power Cord EU Plug #34850 (1)
Instruction Manual (1)
3. Installation
Place unit on a stable work surface with appropriate
ventilation approximately 6" (15.24 cm) from walls or other
equipment. Confirm that electrical ratings listed on the
specifications label meet your electrical needs.
Connections
ENGLISH Power Connection: The Ultra-Waxer 2 is a dual voltage unit.
Simply plug the correct IEC 320 Country specific power cord
into the back of the unit.
Spatula Connection: Connect the two Ultra-Spatulas, by
inserting the Spatula plugs into the two Spatula jacks on the
front of the unit.
4. Touch Pad Operation
Touch Pad contains 4 touch buttons for quick and easy
navigation of the features.
ENTER button for power on/off, and for selection
UP/DOWN button to scroll through options
MENU button to access many applications
Menu Options
Quick Heat - supplies quick heat to a cold tip
Preset Temp - ability to set 4 programmable temperatures
Select C or F – choose between Celsius and Fahrenheit
Auto Off – Enable/Disable and adjust Auto Off time
Buzzer – Enable / Disable buzzer sound
Turn Off UW – Turn off Ultra-Waxer
(See detailed Touch Pad instructions for more information).
Default Settings
Preset Temperatures
Preset Temp 1
Preset Temp 2
Preset Temp 3
Preset Temp 4
Spatula Temperatures
Temperature unit
Auto Off Time
Buzzer
Reset Button
To return to the Default Settings, press the Reset Button
located on the left side of the unit.
93°C/200°F
149°C/300°F
204°C/400°F
260°C/500°F
97°F
°F
90 minutes
Enabled