Uline H-7836 Manual De Instrucciones página 2

Figure 2
C
Figure 3
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
D
E
4. To create first single unit, connect the two upright post
assemblies by inserting front/back supports (C) at the
bottom, middle and top of each upright post.
(See Figure 2)
NOTE: Be sure the supports are fully seated before
continuing with assembly.
5. Repeat steps 1-4 to assemble second single unit and
third single unit.
NOTE: If assembling H-7837, repeat steps 1-5 to
create three additional units.
6. Connect all three single units using the tie plates (D).
Insert tie plates 12" from top and bottom of posts.
(See Figure 3)
NOTE: If assembling H-7837, connect both
assemblies using tie plates on the depth side of
unit.
NOTE: Once the side supports are in place, if
additional stability is desired, secure the shelves
with safety plugs. (See Figure 4)
1-800-295-5510
uline.com
1120 IH-7836