Ordinary Maintenance; External Cleaning - TATRA TPI 05 D.V Manual De Instrucciones

III. ORDINARY MAINTENANCE
The user is solely responsible for ordinary maintenance. The Assistence Centre must be
contacted for extraordinary maintenance which requires a specialized authorized technician.
Before cleaning, disconnect the device from the power supply and wait until it is fully
cold.
ATTENTION: never clean the device with water jet of pressurised vapour.
ORDINARY CLEANING OF COOKING CHAMBER
At the end of a working day, clean the equipment, both for hygienic reasons and to avoid
malfunctioning.
The oven must never be cleaned using direct or high pressure water jets. In the same
manner, to clean the appliance do not use pan-scrubbers, steel brushes or scrapers; it is
possible to use stainless steel wool, rubbing it in the direction of the sheets satin finish
For manual cleaning follow the procedure below:
•
Turn on the appliance and set the temperature to 80°C.
•
Leave it on for 10 minutes on steam
•
Turn off the appliance and let it cool down
•
Remove the side tray racks. Manually remove all removable residues place the
removable parts inside dishwashers.
•
To clean the cooking compartment use soapy warm water. Subsequently, all surfaces
must be thoroughly rinsed, being careful to ensure no detergent residues remain.
To clean the oven external parts, use a damp cloth and a non-aggressive detergent.
•
•
Clean with hot water and soap then rinse.
It is strictly forbidden to wash the cooking chamber in cooking temperatures higher than 70°C,
scalding danger.
Daily cleaning of the oven cooking chamber lining must be carried out with a non-abrasive
detergent to guarantee its full function.
Use plastic bristles or a sponge soave in vinegar and warm water in case of dirt crusts.
Warning: residue fats possibly present in the cooking chamber could catch fire when using the
oven, hence it is advisable to remove them quickly.
Only use products recommended by the manufacturer of the appliance.

EXTERNAL CLEANING

Only use a damp cloth with warm water or products suitable for cleaning stainless steel. Do
not use acidic products or ammonia.
WARNING: the appliance should never be cleaned with high pressure water sprays.
REPLACING LIGHT LAMPS
WARNING: Strictly adhere to the following procedure in order to avoid electrocution or
damage to people:
• Disconnect
connection of the oven and leave
it to cool.
• take off the side grids that hold the
baking trays.
Unscrew the glass cover "A" while
•
observing "C". Replace the lamp
E n g l i s h
the electrical
| 10