Rustic Planer Heads (Accessories); Systainer; Maintenance And Service; Accessories, Tools - Festool HL 850 E Manual De Instrucciones

Rustic planer heads (accessories)

The planer can also be used to create rustic sur-
faces. Three rustic planer heads are available for
this purpose:
• HK 82 RG: creates a surface with a coarse struc-
ture.
• HK 82 RG: creates a surface with a fi ne struc-
ture.
• HK 82 RW: creates an uneven, wavy surface.
The blades on the rustic planing head (HK 82 RF,
HK 82 RG, HK 82 RW) protrude approx. 1.5 mm
over the planer foot. When using rustic planing
heads on the planer, set the cutting depth to
0 mm. Otherwise there is a risk that the blades on
the head will cut into the planer foot and destroy
the planer.
10
The cutting depth limiter (11.2) prevents the
cutting depth from increasing inadvertently while
planing work is performed.
11.1
Always attach the cutting depth limiter to the plan-
er before working with a rustic planing head:
- Set the cutting depth on the planer to 0 mm,
- Attach the cutting depth limiter by inserting the
rotary knob (11.1) through the limiter and into
the threaded hole (11.3).

Systainer

Many Festool products are shipped in a unique
system container, called "Systainer". This
provides protection and storage for the tool and
accessories. The Systainers are stackable and
can be interlocked together. They also can be
interlocked atop Festool CT dust extractors.
All manuals and user guides at all-guides.com
HK 82 RF
HK 82 RG
HK 82 RW
0 mm
11.3
11.2
- Place one systainer on top of the other.
- Release all four latches on the lower systainer
by pulling back at their top edges (12.1).
- Slide all four latches upward (12.2).
- Snap all four latches back to their fl at position
(12.3) so they engage the stacking tabs of the
upper systainer.

Maintenance and service

Always disconnect the mains plug
from the socket before carrying out any mainte-
nance work on the machine.
Any maintenance and repair work
requiring an opening of the motor housing may
only be carried out by an authorised customer
service workshop.
The planer platen is made of a high-quality mag-
nesium alu minium alloy. Any corrosion which may
occur can be removed by buffi ng using a fi ne
elastic fi bre mat „V lies quality" (grit S800). To
prevent corrosion of the chromated planer head
any cleansant used must have a pH value of be-
tween 4.5 and 8.
Keep the ventilation slots in the motor housing
clean and free of obstructions at all times to en-
sure an adequate circulation of air.
The planer is fi tted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically
and the planer comes to a standstill.

Accessories, tools

For safety reasons, only use original
Festool accessories and tools!
Three rustic planer heads are also available as
accessories. The planer head HK 82 RG provides
a coarse rustic texture and the HK 82 RF a fi ne
rustic texture. The planer head HK 82 RW provides
an irregular undulated surface. All rustic planer
heads can only be fi tted with the HSS spiral cut-
12.3
12.2
12.1
7