Stryker 0240-031-050 Manual Del Usuario página 15

Display Handles
Caution: The handles are intended to aid in positioning the display, not for transporting the
display. The handles should not bear the full weight of the display.
Removing the Display Handles
1. Using a 3 mm hex key, loosen the two M4 x 25 mm screws and gently pull the handle away
from the display.
Installing the Display Handles
1. Align the handle with the screw holes on the rear of the display.
2. Using a 3 mm hex key, install the two M4 x 25 mm screws to attach the handle.
EN-11