Parts List - Cosatto 3SIXTI Manual De Instrucciones

introduction
The 3sixti highchair is designed for maximum usability with various seat heights and six different
seat orientations.
1

parts list

1.inner tray (dishwasher safe) 2.tray 3.seat 4.vertical leg 5 Base front 6.base rear left 7.base rear
right 8.seat cover 9.harness 10.allan key 11.m6 bolt 12.m8 bolt
2 assembling the base
Insert the base rear left(6) and the base rear right(7) on to the base front(5) when they are fully assembled
you will hear a "click" when they are secured into place.
Next line up (b & c) so the base supports (a) appear as(d).
3 attach support tube to base
Insert the vertical leg(4) into the base as shown ensure it is securely slotted in place by aligning
the slot so it fits flush to the rear of the base front. Insert m8 bolt(12) using the allen key(11)
and tighten to secure into place.
4 attaching the seat
1.Raise tube to highest position by pressing the air control handle(see section 11).
Place the seat(3) onto the vertical leg(4) as shown.
CAUTION:
ensure the chair is aligned as in the illustration for correct assembly.
Secure the seat (3) with the five m6 bolts(11) using a pozidriv screw driver.
WARNING:
Do not use the highchair unless all components are correctly fitted.
5 attaching the seat cover
Place seat cover(9) over the seat(3) and pull down into position.
place seat cover over the crotch post as shown.
6 attaching and using the harness
To fit the harness(10), feed the lower harness buckles through the slot at the front of the seat as
shown and rotate so the buckles cannot come back trough the slots.
Do the same for the top two buckles note: there are two height options, use the height that
best suits your child.
WARNING:
Once the harness is in place ensure the buckles are rotated so they cannot be
pulled back through the slots. Check the correct fitting by giving the harness a sharp tug, it
should remain in place. A harness must be worn at all times whilst your child is in the highchair.
The buckle clips together as shown and are released by pressing(a & b) simultaneously.
The harness can be adjusted by buckles(c, d & e) to suit your child.
All manuals and user guides at all-guides.com