Default Settings:
Auto-Start in CC Mode, 180° turne d recording to mount onto the dash board of the car, Timestamp activated
180° turn:
Press the center button until the letter s in the LCD-display turn 180° . This turns the reco rding as well.
Timestamp:
Press the „M"-button. The display will show „- -„ for deactivated timestamp and „| |" for activated timestamp.
Synchronize
Write a text file named clock.txt to your SD card using windows editor (Programs -> Accessories) where you put the
the Timestamp:
date and time into the first line According this format: „YYYY-MM-DD HH-MM-SS" ex.:„2010-10-22 17- 30-00"
Put the card into the camera and switch it on. The camera will take the settings from the card and delete file clock.txt.
How it works:
Installed inside a car the Camera detects in standard mode "
stops automatically, recording Videos with a length of 15 minutes. Oldest files will be deleted if necessary. For best results use a SD-Card
with 2, 4 or 8GB and a writing speed of 4MB/sec minimum. The card "clicks" when inserted – use a pen for support.
Installation inside a car:
Remove the film protecting the lens. Insert the adaptor-plug into the cigarette socket. Fix the camera somewhere inside the car and let the
lens point to the selected direction. Adjust with the pivot head. Make sure the cable will never affect your action at any time.
When starting the engine of your car the camera indicates the recording by turning bars in the display, the car adaptor's green LED starts
blinking.
When the engine stops, the recorded file will be closed shown by "
minutes. Oldest files will be deleted if free memory is getting low. A 3 second gap will be in between the video files; equal to 0,3% of each file.
Depending onto the position inside the car the final video has to be turned 180° - use MicroSoft® Movi e Maker to realize.
Applications outside the car
The camera's battery will last for about 30 minutes. The optional eXtreme BatteryPack will give additional 3,5h. With the Sportster HeadSet you can
record hands free and the DiveBox protects against dust and snow and supports diving up to 2m depth.
Connect to your PC
Select „PC" to download the files from the camera or „WC" to use it as a Webcam. Do this before connecting to your computer! Once the camera is
connected the menu is locked and will be unlocked not before separated again. Switch off after disconnecting!
Download the data
Choose „
" and connect the CarCamOne with the supplied USB-cable and your PC.
The CarCamOne will be displayed as a single drive. Attend that network drives can interfere the CarCamOne drive.
Cut the network drives. Of course you can connect the SD-card directly to your pc card reader.
CC
" the status of the engine trough the cigarette plug. The camera starts and
CC
" and the camera shuts down. The camera records videos with a length of 15