Accu-Chek Performa Nano Instrucciones De Uso página 23

5. Trigger the lancing device
while keeping steady pressure
on the site. Apply pressure to
the site with the lancing device
to assist the flow of blood.
NOTE
• If the blood drop is too small, reapply pressure to get a sufficient blood drop.
• After a successful test, the meter turns off 5 seconds after the test strip is removed.
6. Touch the blood drop to the
front edge of the yellow
window of the test strip. Do not
put blood on top of the test
strip. When you see flash,
there is enough blood in the
test strip.
OR
7. The test result appears on the
display. Leave the test strip in
the meter to mark a special
event (see Marking Blood
Glucose Results and Setting
the Post-Meal Test Reminder).
Otherwise, remove and discard
the used test strip.
21