12 electrolux use
machine is working, the red Start/Pause
pilot light will flash 3 times and the
message Err will appear on the display
to indicate a wrong selection. The
machine will not perform the new
selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
Select the temperature
Planchado
Temp.
Centrifug.
AquaCare
fácil
Press this button repeatedly to increase or
decrease the temperature, if you want
your laundry to be washed at a
temperature different from the one
proposed by the washing machine.
Maximum temperatures are 90°C for
cottons and economy programmes,
60°C for synthetics and jeans, 40°C for
delicates,Baby, Sport Intensive,
Lingerie, wool, fabrics to be
handwashed and blanket, 30°C for silk
while
corresponds to cold wash.
During the washing cycle the
thermometer is animated.
All manuals and user guides at all-guides.com
Select the spin speed, No spin,
Rinse Hold or Night Cycle option
Press the Spin button repeatedly to
change the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
During the spinning phase the spiral is
animated.
Time
Maximum speeds are:
Manager
●
Inicio
diferido
Inicio/
Pausa
●
●
●
No spin
spin phases and increases the number
of rinses for cottons, synthetics,
Delicates, Silk, Lingerie and Jeans
programme.
Rinse Hold
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows a
flashing, the
visualized, the Start/Pause light is off and
the door is locked to indicate that the
water must be emptied out.
Planchado
Temp.
Centrifug.
AquaCare
fácil
for Cotton, Jeans and Economy
programmes: 1200 rpm;
Wool and Handwash: 1000 rpm;
for Synthetics, Sport Intensive and
Lingerie: 900 rpm;
for Delicate fabrics, Silk, Baby and
Blanket: 700 rpm.
option eliminates all the
: by selecting this
(Door) icon is still
Time
Manager
Inicio
diferido
Inicio/
Pausa
0.00