Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Setting the timer
Hint: The lapse of time can be indicated by choice
with an acoustic signal, a vibration alert or a light
signal by setting the corresponding switch on the
reverse side of the timer to position ON.
of all three is possible as well.
Push the MIN button for 4 seconds to switch from
clock to timer display. Initially minutes/seconds (M/S)
are displayed with a start time of 00:00. By pushing
the MIN button you can set the desired minutes, with
the SEC button the desired seconds. Push the ON/Off
button to start the timer which can be interrupted and
continued with the same button. The maximum
measurable time is 99 minutes and 59 seconds.
When the time has elapsed the timer blinks, beeps or
vibrates, according to the chosen signal. Stop the
signal by pushing any button.
To set the timer for hours/minutes (H/M) push the
MIN button again. Proceed as described above, the
maximum measurable time is 99 hours and 59 minutes.
16
combination
Publicidad
