Using The "Cleaning Milk System" Programme - melitta VARIANZA CSP Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 243
Care and maintenance
3. Navigate to the Care > Easy Cleaning menu.
4. Select Start using the arrow buttons and confirm with "menu/ok".
5. Follow the further instructions on the display up to the end of the Easy
Cleaning programme.
»
The ready symbol appears on the display.
9.5

Using the "Cleaning milk system" programme

A milk system cleaning agent is required for cleaning the milk system.
To maintain hygiene and avoid damage to the appliance, we recommend
carrying out the cleaning programme once a week.
The cleaning programme takes approximately 3 minutes and should not be
interrupted.
ATTENTION
Use of unsuitable milk system cleaning agents and failure to observe the
processing instructions may damage the appliance.
Only use Melitta® PERFECT CLEAN milk system cleaning agent for fully
ƒ
automatic coffee makers.
Observe the processing instructions on the packaging of the milk system
ƒ
cleaning agent.
Requirement: The ready symbol appears on the display.
1. Place the coffee grounds container (7) or a vessel with a capacity of at
least 0.7 litres beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
»
The menu appears on the display.
3. Navigate to the Care > Cleaning milk system menu.
4. Select Start using the arrow buttons and confirm with "menu/ok".
5. Follow the further instructions on the display up to the end of the clean-
ing programme.
»
The ready symbol appears on the display.
88

Publicidad

Tabla de contenido
loading

Tabla de contenido