Before You Start - REFLECTS 51760 Manual Del Usuario

Crosspieces
(they go across)
Before you
start!
Easiest way to make the
bridge!
Lift the crosspiece and slide the
long pieces in from the center.
Start with three, add a crosspiece.
Lift and insert two on the left.
Slide a crosspiece under on
the right side.
51760 AL.indd 5
Master Drawing
Long pieces
(they go
lengthwise)
Crosspieces have no
grooves!
Long pieces have grooves - the middle groove
always faces up, (so end grooves are facing down)!
Add crosspiece on the left.
Slide a crosspiece under on the
right.
Lift and insert the final two long
pieces.
Build it on a tab-
le, then move it
to the platform
for display!
Add to the inside and
the outside!
When adding long pieces you can insert
them alternating on the inside and the
outside, or just on the outside - but it will
look funny!
Make it a couple of times - different ways!
Lift and insert two pieces on the
right.
Lift and insert two long pieces on
the right.
Now try to slide
it onto your
presentation
board!
GB
01.07.2013 13:52:05