BEHA UNITEST 9004 Manual De Instrucciones página 13

Instruction Manual
Contents
1.0 Introduction / Scope of Supply
2.0 Safety Measures
3.0 Operation Elements and Connections
4.0 Carrying out Measurements
4.1 Preparations and Safety Measures
4.2 Voltage Measurement
4.3 Current Measurement
4.4 Resistance Measurement
4.5 Diode Test
4.6 Continuity Test
5.0 Maintenance
5.1 Battery Replacement
5.2 Fuse Replacement
6.0 Technical Characteristics
References and Symbols marked on the instrument:
Attention, comply with instruction manual
Double insulated, protection class II IEC 536
Conformity symbol, confirms respect of valid Directives. The
EMV-Directive (89/336-EEC) with Standards EN 50081-1 and EN
50082-1 and the Low Voltage Directive (72/23/EEC) with Standard
EN 61010-1 are respected.
This instruction manual contains information and warnings
necessary for the safe operation and maintenance of the instrument.
It is recommended that you read and understand this instruction
manual thoroughly prior to using the instrument. Failure to understand
these instructions and to comply with the warnings and instructions
contained can result in serious injury or damage.
1.0 Indroduction / Scope of Supply
The 9004 and 9005 UNITEST multimeters are multi-function instru-
ments. These test instruments have been developed, built and tested
in compliance with the valid European safety regulations and have left
our factory in perfect and safe condition. The multimeters are used for
all standard professional measuring tasks.
They are characterized as follows:
UNITEST 9004
Constructed according to
DIN VDE 0411, EN 61010, Part 1
IEC 61010
Digital LCD, 1999 digits
DC voltage measurement
up to 600 V
UNITEST 9005
Constructed according to
DIN VDE 0411, EN 61010, Part 1
ICE 61010
Digital LCD, 3260 digits
Analogue bargraph display
DC voltage measurement
up to 600 V
Pages
13
14
15
17
17
17
18
18
19
19
19
19
20
20
13