Whittier Wood Products 499W Instrucciones Para Armar página 5

O x4
O
FIG. 4
O
4. Attach the Center Shelf (F) to the Upper Left Side Panel (A) with two #8x1
through the predrilled holes in the center shelf and into the pilot holes in the bottom edge of the
side panel. Start both screws BEFORE FULLY TIGHTENING. Repeat and attach Upper Right
Side Panel (B) to Center Shelf (F). See FIGURE 4.
5. Attach the Top Shelf (E) to the Upper Left Side Panel (A) and the Upper Right Side Panel (B) by
sliding the Rafi x Bolts into the Rafi x Cams. Tighten the cams. See FIGURE 5.
6. Attach the Lower Left Side Panel (C) to the Center Shelf (F) by sliding the Rafi x Bolts into the
Rafi x Cams. Tighten the cams. Repeat and attach the Lower Right Side Panel (D) to the Center
Shelf. See FIGURE 6.
7. Attach the Bottom Shelf (G) to the Lower Left Side Panel (C) and the Lower Right Side Panel (D)
by sliding the Rafi x Bolts into the Rafi x Cams. Tighten the cams. See FIGURE 7.
All manuals and user guides at all-guides.com
O
O
FIG. 6
FIG. 5
5
/ " Black Screws (O)
8
FIG. 7
498W & 499W – PAGE 5