Trolley With Raingun Configuration; Trolley With Spray Boom Configuration - IRTEC smart Manual De Instrucciones

13.5.1. Trolley with raingun configuration.

F1
F2
F3
F4
On this page it is possible to set:
o Diameter of the raingun installed
o Working angle on the left side according to the mechanical configuration of the raingun.
o Working angle on the right side according to the mechanical configuration of the raingun.

13.5.2. Trolley with spray boom configuration.

F1
F2
F3
F4
On these pages the following can be set:
o Spray boom type (length).
o Type of nozzles installed, see the boom technical datasheet.

Speed priority (figure 61): where the operator sets the desired speed directly for every single sector.

Time priority (figure 62) where the operator can directly set the time required to perform the
complete return of the trolley, paying attention to the machine potential.
The sector configuration page can be accessed from all pages shown above.
SMART
20/01/2020
143
144
F5
F6
F7
F8
F5
F6
F7
F8
63