Configurations; Sms Modem Management (If Enabled In The Configurations) - IRTEC smart Manual De Instrucciones

16. Configurations.

F1
F2
F3
F4
The configuration page displays some important data of the machine control system:

Display Serial Number.

Machine serial number + software version installed.

Software version installed on the I/O module.

Battery charge status.
From this page it is possible to access all the configurations:
F1 key- access to the configuration sequence already explained in chapter 0.
F2 key- SMS modem management/configuration.
F4 key- access to advanced configuration operations.
F5 key- modify date/time.
F6 key- verify and check machine inputs and outputs.
F8 key- return to HOME.
16.1.

SMS modem management (if enabled in the configurations).

SMS modem management is accessed by means of the F2 key:
On this page it is possible to enter up to 10 numbers to which the machine status and alarm SMS
messages can be sent, then it is possible to enable/disable transmission for every single number through
the F2 key which changes icon based on the function:
The first one enables the number while the second one disables it.
70
154
F1
F2
F3
F4
155
F5
F6
F7
F8
F5
F6
F7
F8
SMART
20/01/2020