Date And Time - IRTEC smart Manual De Instrucciones

letter R and, if it is a command, are followed by the command code.
R001 Sent message text not
recognised
R002 Running
R003 Stopped
R004 Expected Arrival
R005 Rain priority
R006 Speed priority
R007 Speed priority
R-C002 OK- STOP command acquired
R-C002 KO- Machine already in STOP
R-C003 OK- New speed set in the sector:
R-C003 KO- SPEED VALUE not valid
R-C004 OK- New rainfall set in the sector:
R-C004 KO- RAINFALL VALUE not valid
R-C005/6 KO- Machine already RUNNING
R-C005 OK- Running in speed mode with
internal program
R-C005 KO- Running with constant speed:
R-C006 OK- Running in rainfall mode with
internal program
R-C006 KO- Running with constant
rainfall:
R-C007 START- INITIAL TIME:
R-C007 END- FINAL TIME:
R-C007 KO- Time values not valid
16.2.

DATE and TIME.

SMART
20/01/2020
It means that the text of the message sent is not
correct.
Machine status at query C001 or #DATA
Machine status at query C001 or #DATA
Text to indicate the time of arrival to query #C001 or
#DATA
Text to indicate the operating mode at query #C001 or
#DATA
Text to indicate the operating mode at query #C001 or
#DATA
Text to indicate the operating mode at query #C001 or
#DATA
Potential response to the #C002 or #STOP command
Potential response to the #C002 or #STOP command
Potential response to the #C003=xx or #SPEED=xx
command
Potential response to the #C003=xx or #SPEED=xx
command
Potential response to the #C004=xx or #PLUVIO=xx
command
Potential response to the #C004=xx or #PLUVIO=xx
command
Potential response to the #C005,#C006 or
#STARTV,#STARTP command
Response to the #C005 or #STARTV command
Response to the #C005 xx or #STARTV xx command
Response to the #C006 or #STARTp command
Response to the #C006 xx or #STARTP xx command
Potential response to the #C007 xx yy or #TIMES xx
yy command
Potential response to the #C007 xx yy or #TIMES xx
yy command
Potential response to the #C007 xx yy or #TIMES xx
yy command
F1
F2
F3
F4
159
F5
F6
F7
F8
73