Bresser junior 8855002 Instrucciones De Uso página 15

Smartphone holder
Open the flexible holder and put your smart-
phone in it. Close the cradle and make sure your
phone is properly seated. The camera must be
positioned exactly above the eyepiece. Open
the locking clip on the back of the holder and
fit the eyepiece view exactly onto your smart-
phone camera. Now retighten the locking clip
and attach the smartphone holder to the eye-
piece of your microscope. Now start the cam-
era app. If the image is not yet centered on
your display, loosen the locking clip slightly
and readjust. It may be necessary to use the
zoom function to fill the image on the display.
A slight shading at the edges is possible. Re-
move the smartphone from the cradle after use!
NOTE:
Make sure that the smartphone cannot slip off
the cradle. Bresser GmbH accepts no liability
for damage caused by a dropped smartphone!
Make sure your microscope has a long
service life.
Clean the lens (objective and eyepiece) only with
the cloth supplied or some other soft lint-free
cloth (e.g.microfibre). Do not press hard as this
might scratch the lens.
Ask your parents to help if your microscope is
really very dirty. The cleaning cloth should be
moistened with cleaning fluid and the lens wi-
ped clean using little pressure.
Make sure your microscope is always protected
against dust and dirt. After use leave it in a warm
room to dry off. Then install the dust caps and
keep it in the case provided.
Warranty & Service
The regular guarantee period is 5 years and be-
gins on the day of purchase. You can consult the
full guarantee terms and details of our services
at www.bresser.de/warranty_terms.
EN
15