Adjusting The Freezer Compartment Drawer - Bosch B26FT Serie Instrucciones De Uso

en-us
If the refrigerator doors are not properly aligned:
WARNING
Risk of electric shock!
Before removing the top panel:
1. Shut off the water supply to the appliance.
2. Unplug the appliance or switch off the circuit
breaker (or fuse).
1. Determine which refrigerator door needs
adjustment.
2. Remove the five screws on the top panel.
3. Raise the panel.
4. Loosen the screw.
Do not remove the screw!
5. Move the hinge sideways to adjust the refrigerator
door.
6. Tighten the screw.
7. Realign panel.
8. Insert and tighten the five screws.
10
Adjusting the freezer compartment
drawer
If the freezer drawer is higher on one side than the
other (not even):
1. Loosen the three side screws (1) on the side
where adjustment is needed.
2. Move the Stopper (2) from "left picture position" to
"right picture position".
1
3
1
2
1
3. Adjust the leveling by rotation the Position
Knob (3). (Pull and rotate the Position Knob)
3 3
4. After adjusting the leveling, tighten the four side
screws (1)+(4).
1
2
4
3
1
1