BURG-WACHTER BURGcam BULLET 3040 Manual De Instrucciones página 40

Option 1 - Setup via LAN (network cable) and PC
with the „BURGconfig Tool" software
Connect the camera to your local router using the network cable
(not supplied). Make sure the camera and PC/notebook are on the same
network. Install the BURGconfig tool and start the application. The came-
ra is supplied with DHCP (automatic IP assignment) as standard.
If your network uses fixed IPs the camera is displayed with
IP 192.168.1.108. In this case, switch your PC IP to the same network.
Select the desired device and click on the browser icon „
The Setup Wizard appears and guides you through the menu. Follow the
instructions and assign a secure password for the
administrator account.
To add the device to the BURGcam App follow the instructions
of „Integrating the camera in the BURGcam APP".
40 | English
BURGconfig Tool:
Click here to download.
Alternatively you can download the BURGconfig tool
from the homepage www.burg.biz
" (Fig. 1)
BURGcam BULLET 3040