Maintenance Table - Malaguti F10 Manual De Uso Y Mantenimiento

5.2

MAINTENANCE TABLE


2
Spark plug (condition and electrode gap)
Final transmission oil
Idling speed
3
V‑belt
Sliding pads / variator rollers
Tightness of the braking system pipes
4
Air filter
Battery condition and charge level
Brake pads / blocks / discs ‑ condition and wear
5
Braking system fluid
Wheel bearings
Chassis linkages (or levers)
6
Steering system operation and play (lubricate if necessary)
Operation and tightness of fork and shock absorbers
Tightness of nuts and bolts
Tightness of centre stands ‑ Pivot lubrication
Throttle control / throttle cable play
Tire pressure ‑ tread wear
Final check: tires, pressure, lighting, warning devices, switch functions,
road test
ENG
Nr.
: coupon
: check
: clean
: adjust
: replace
24
All manuals and user guides at all-guides.com
CHECKS AND REPLACEMENT
OPERATIONS
Note: maintenance operations should be performed more frequently if the vehicle is used in
rainy weather, in dusty places or on rough terrain.
Note: (**) Checks must be performed between one coupon and the next.
Due to their simplicity, checks with no asterisk CAN also be carried out by technicians not
authorised by MALAGUTI, but under their direct responsibility.
1 2 3
Checks
FIRST 3.000 km 6.000 km
(**) .000 km (.872 mi) (3.744 mi)
(624mi) or 6 months or 2 months
*
/
*
*
*
*
*
every 2.000 Km (1,250 mi)
*
every 24 months or 12.000 Km (7,500 mi)
*
*
*
*
*
*
*
*
4 5 6 7
9.000 km 2.000 km 5.000 km 8.000 km
(5.66 mi) (7.488 mi) (9.360 mi) (.232 mi)
or 8 months or 24 months