LOWERING THE JACK
1. Unfasten the tie-down straps.
2. Raise load high enough to allow clearance for the
safety locks to be raised.
3. Before lowering the load, push down on the outer
ends of the safety arms to disengage them.
4. Grasp the lowering handle firmly. Securely hold on
to the jack lowering valve so your hands do not
slip and ensure the release valve does not rapidly
lower.
All manuals and user guides at all-guides.com
Foot pedal
Safety Arm
Release
valve
5. Carefully open the Release Valve by slowly
turning the handle counterclockwise. (Do not
allow bystanders around the jack or under the
load when lowering the jack.
6. After removing jack from under the load, saddle
all the way down to reduce the cylinder rams
exposure to rust and contamination.
WARNING USE EXTREME CAUTION WHEN
LOWERING THE JACK. THE JACK HANDLE
MAY TURNRAPIDLY. OPENING THE
RELEASE VALVE TOO FAST CAN CAUSE
THE JACK TO LOWER RAPIDLY. FAILURE
TO HEAD THESE WARNINGS COULD
CAUSE SERIOUS INJURY OR DEATH.
10