Maintenance; Technical Specifications - Kunft KTE3513 Manual De Instrucciones

Weekly Program: 1 ~ 5 (Mon-Fri): P1
6 (Saturday): P2
7 (Sunday): P3
Factory presetting
Confort ( ): 22°C
Economic ( ): 17°C
Note: When pressing to power on, the unit will come back on to
the factory pre-sets.
4 Other notes
• The screen has a back light. It will turn off after 1 minute if you don't
press any buttons. It will light up again if you press any button.
• The unit has a button lock function. The buttons will be locked (
after 1 minute if you don't press any buttons.
• To unlock: press and at same time.
• The time will be reset to 00:00 if you unplug the unit, or if there is
a power cut.
• This heater includes an overheat protection system that shuts off
the heater when parts are getting excessively hot.
• will only show when the unit is heating.
• The units will always go into free use mode from standby mode.
• The unit will return to the last operating mode when powered off
and on.
Anti-frost ( empty ): 7°C
AU: 1~5 (Monday ~ Friday): P1
6 (Saturday): P2
7 (Sunday): P3
18
electric radiator 600W

2.3. Maintenance

Always remove the plug from the socket and allow the heater to cool
down before cleaning it.
Wipe the exterior surface of the heater occasionally with a soft damp
cloth (not dripping wet) and dry the exterior surface before operating
the heater.
WARNING:
Do not immerse the heater in water.
Do not use any cleaning chemicals such as detergents and
abrasives. Do not allow the interior to get wet as this could
create a hazard.
Accumulated dust may be removed from the heater with a soft dry cloth.
To store the heater, put the heater back into its original packaging
and store it in a clean dry place.
In case of malfunction or if you have any doubt, do not try to repair
the heater by yourself, it may result in a fire hazard or electric shock.

3. TECHNICAL SPECIFICATIONS

MODEL NO
KTE3513 /
NDFL791B-4R
)
KTE3513
RATED
FINS NET SIZE VOLTAGE
4 495 x 590 x 80 mm ~230V/50HZ
19
EN
RATED
POWER
600W