Affinity iLumaLight El Manual Del Propietario página 4

iLumaLight™ OPERATION
Setting the Desired Start Time
At the desired start time, press the
black button to start the cycle.
Once the start time has been set,
iLumaLight™ will automatically turn
on at that same time each night.
NOTE: In a bright room, the night
light will turn on for a few seconds
and then turn off. In a dark room,
the night light will turn on after a few
seconds and stay on for the 8-hour
cycle.
NOTE: The cycle start time can be
reset at any time by pressing the
black button or by removing and
reinstalling the battery.
INSTALLING iLumaLight™ ON SEAT
1
Place seat upside down on a soft
surface with the hinges facing
toward you.
Install the seat using the instructions provided with the seat.
4 4
For product information and videos visit:
www.AffinitySeats.com
2
2
Snap the iLumaLight
aligning the mounting tabs into the
grooves on the outside of hinge.
1
2
™
into place,