Delta OHM HD 8706-R2 Manual De Instrucciones página 8

CODICI DI ORDINAZIONE
HD 8706K-R2: kit conduttivimetro composto da valigetta
tipo 24 ore, strumento HD 8706-R2, sonda combinata
temperatura/conduttività SPT06, soluzioni di taratura HD
8712 e HD 8714, software DeltaLog1, cavo 9CPRS232
SPT06: sonda di ricambio combinata temperatura/conduttività
per HD 8706K-R2
SPT01: sonda di conducibilità a 2 elettrodi, costante di cella 0.1.
Campo di misura: 0.1μS..500μS, 0..50°C. Epoxy/grafite
SPT01G: sonda di conducibilità a 2 elettrodi, costante di
cella 0.1
Campo di misura: 0.1μS..500μS, 0..50°C. Vetro/Platino
SPT1: sonda di conducibilità a 2 elettrodi, costante di cella 1.
Campo di misura: 10μS..10mS, 0..50°C. Epoxy/Grafite
SPT1G: sonda di conducibilità a 2 elettrodi, costante di cella 1.
Campo di misura: 10μS..10mS, 0..50°C. Vetro/Platino
SPT10: sonda di conducibilità a 2 elettrodi, costante di cella 10
Campo di misura: 100μS..200mS, 0..50°C. Epoxy/Grafite
SPT10G: sonda di conducibilità a 2 elettrodi, costante di cella 10
Campo di misura: 100μS..200mS, 0..50°C. Vetro/Platino
HD 8712: soluzione di taratura conducibilità 12.880 μS/cm a
25°C; 0,1 mol/I
HD 8714: soluzione di taratura conducibilità 1.413 μS/cm a
25°C; 0,01 mol/I
TP 870: sonda di temperatura per immersione, sensore Pt100,
Ø 3 x 230 mm, campo di lavoro -50...+400°C
TP 870/C: sonda di temperatura a contatto, sensore Pt100, Ø 4
x 230 mm, campo di lavoro -50...400°C
TP 870/P: sonda di temperatura a punta per penetrazione, sen-
sore Pt100, Ø 4 x 150 mm, campo di lavoro -50...+400°C
TP 870/A: sonda di temperatura per misure in aria, sensore
Pt100, Ø 4 x 230 mm, campo di lavoro -50...+250°C
9CPRS232: cavo di collegamento null-modem 9 poli femmina
SUB D per uscita RS 232 C.
BESTELLNUMMERN
HD 8706K-R2: Leitfähigkeitsmesskit bestehend aus Tra-
gekoffer, Gerät HD 8706-R2, kombinierte Temperatur/
Leitfähigkeitssonde SPT06, Eichlösungen HD 8712 und HD
8714, Software DeltaLog1, serielles Kabel 9CPRS232
SPT06: komb.Temperatur/Leitfähigkeits-Ersatzsonde
HD 8706K-R2
SPT01: Leitfähigkeitsonde mit 2 Elektroden, Zellkonstante 0.1.
Messbereich: 0.1μS..500μS, 0..50°C. Epoxy/Graphit
SPT01G: Leitfähigkeitsonde mit 2 Elektroden, Zellkonstante 0.1
Messbereich: 0.1μS..500μS, 0..50°C. Glas/Platin
SPT1: Leitfähigkeitsonde mit 2 Elektroden, Zellkonstante 1.
Messbereich: 10μS..10mS, 0..50°C. Epoxy/Graphit
SPT1G: Leitfähigkeitsonde mit 2 Elektroden, Zellkonstante 1.
Messbereich: 10μS..10mS, 0..50°C. Glas/Platin
SPT10: Leitfähigkeitsonde mit 2 Elektroden, Zellkonstante 10
Messbereich: 100μS..200mS, 0..50°C. Epoxy/Graphit
SPT10G: Leitfähigkeitsonde mit 2 Elektroden, Zellkonstante 10
Messbereich: 100μS..200mS, 0..50°C. Glas/Platin
HD 8712: Leitfähigkeitseichlösung 12.880 μS/cm a 25°C;
0,1 mol/I
HD 8714: Leitfähigkeitseichlösung 1.413 μS/cm a 25°C; 0,01
mol/I
TP 870: Temperaturtauchfühler, Pt100 Sensor, Ø 3 x 230 mm,
Arbeitsbereich -50...+400°C
TP 870/C: Temperaturkontaktsonde, Pt100 Sensor, Ø 4 x 230
mm, Arbeitsbereich -50...400°C
TP 870/P: Temperatureinstichsonde, Pt100 Sensor, Ø 4 x 150
mm, Arbeitsbereich -50...+400°C
TP 870/A: Sonde zur Messung der Lufttemperatur, Pt100 Sen-
sor, Ø 4 x 230 mm, Arbeitsbereich -50...+250°C
9CPRS232: Serielles Kabel mit 9-poliger SUB D Steckerbu-
chse für serielle Schnittstelle RS 232 C.
All manuals and user guides at all-guides.com
ORDER CODES
HD 8706K-R2: conductivity meter kit composed of carrying
case, instrument HD 8706-R2, combined temperature/
conductivity probe SPT06, calibrating solutions HD 8712
and HD 8714, software DeltaLog1, cable 9CPRS232
SPT06: spare combined temperature/conductivity probe for
HD 8706K-R2
SPT01: 2 electrode conductivity probe, cell constant 0.1.
Working range: 0.1μS..500μS, 0..50°C. Epoxy/Graphite
SPT01G: 2 electrode conductivity probe, cell constant 0.1
Working range: 0.1μS..500μS, 0..50°C. Glass/Platinum
SPT1: 2 electrode conductivity probe, cell constant 1.
Working range: 10μS..10mS, 0..50°C. Epoxy/Graphite
SPT1G: 2 electrode conductivity probe, cell constant 1.
Working range: 10μS..10mS, 0..50°C. Glass/Platinum
SPT10: 2 electrode conductivity probe, cell constant 10.
Working range: 100μS..200mS, 0..50°C. Epoxy/Graphite
SPT10G: 2 electrode conductivity probe, cell constant 10.
Working range: 100μS..200mS, 0..50°C. Glass/Platinum
HD 8712: conductivity calibrating solution 12.880 μS/cm at
25°C; 0,1 mol/I
HD 8714: conductivity calibrating solution 1.413 μS/cm at
25°C; 0,01 mol/I
TP 870: immersion temperature probe, Pt100 sensor, Ø 3 x
230 mm, working range -50...+400°C
TP 870/C: contact temperature probe, Pt100 sensor, Ø 4 x
230 mm, working range -50...400°C
TP 870/P: pointed temperature probe, Pt100 sensor, Ø 4 x
150 mm, working range -50...+400°C
TP 870/A: air temperature probe, Pt100 sensor, Ø 4 x 230
mm, working range -50...+250°C
9CPRS232: 9 pole female SUB D connecting cable null-
modem for RS 232 C output.
CÓDIGOS DE PEDIDO
HD 8706K-R2: kit conductímetro compuesto por maletín tipo
24 horas, instrumento HD 8706-R2, sonda combinada
temperatura/conductividad SPT06, soluciones de calibración
HD 8712 y HD 8714, software DeltaLog1, cable 9CPRS232
für SPT06: sonda de recambio combinada temperatura/con-
ductividad para HD 8706K-R2
SPT01: sonda de conductividad de 2 eléctrodos, constante
de celda 0.1.
Rango de medida: 0.1μS..500μS, 0..50°C. Epoxy/grafito
SPT01G: sonda de conductividad de 2 eléctrodos, constante
de celda 0.1
Rango de medida: 0.1μS..500μS, 0..50°C. Vidrio/Platino
SPT1: sonda de conductividad de 2 eléctrodos, constante
de celda 1.
Rango de medida: 10μS..10mS, 0..50°C. Epoxy/Grafito
SPT1G: sonda de conductividad de 2 eléctrodos, constante
de celda 1.
Rango de medida: 10μS..10mS, 0..50°C. Vidrio/Platino
SPT10: sonda de conductividad de 2 eléctrodos, constante
de celda 10.
Rango de medida: 100μS..200mS, 0..50°C. Epoxy/Grafito
SPT10G: sonda de conductividad de 2 eléctrodos, constante
de celda 10.
Rango de medida: 100μS..200mS, 0..50°C. Vidrio/Platino
HD 8712: solución de calibración conductividad 12.880 μS/cm
a 25°C; 0,1 mol/I
HD 8714: solución de calibración conductividad 1.413 μS/cm
a 25°C; 0,01 mol/I
TP 870: sonda de temperatura para inmersión, sensor Pt100,
Ø 3 x 230 mm, rango de funcionamiento -50...+400°C
TP 870/C: sonda de temperatura a contacto, sensore Pt100,
Ø 4 x 230 mm, rango de funcionamiento -50...400°C
TP 870/P: sonda de temperatura a punta por penetración, sensor
Pt100, Ø 4 x 150 mm, rango de funcionamiento -50...+400°C
TP 870/A: sonda de temperatura para medida en aire,
sensor Pt100, Ø 4 x 230 mm, rango de funcionamiento
-50...+250°C
9CPRS232: cable de conexión null-modem 9 polos hembra
SUB D para salida RS 232 C.
DELTA OHM SRL - VIA G. MARCONI, 5
35030 CASELLE DI SELVAZZANO (PD) - ITALY
TEL. 0039-0498977150 r.a. - FAX 0039-049635596
e-mail: deltaohm@tin.it - Web Site: www.deltaohm.com
CODES DE COMMANDE
HD 8706K-R2: kit conductivimètrique composé d'une malette,
instrument HD 8706-R2, sonde combinée temperature/
conductibilité SPT06, solutions d'étalonnage HD 8712 et
HD 8714, logiciel DeltaLog1, câble 9CPRS232
SPT06: sonde de rechange accouplée température/con-
ductibilité pour HD 8706K-R2
SPT01: 2 electrode conductivity probe, cell constant 0.1.
Working range: 0.1μS..500μS, 0..50°C. Epoxy/Graphite
SPT01G: 2 electrode conductivity probe, cell constant 0.1
Working range: 0.1μS..500μS, 0..50°C. Glass/Platinum
SPT1: 2 electrode conductivity probe, cell constant 1.
Working range: 10μS..10mS, 0..50°C. Epoxy/Graphite
SPT1G: 2 electrode conductivity probe, cell constant 1.
Working range: 10μS..10mS, 0..50°C. Glass/Platinum
SPT10: 2 electrode conductivity probe, cell constant 10.
Working range: 100μS..200mS, 0..50°C. Epoxy/Graphite
SPT10G: 2 electrode conductivity probe, cell constant 10.
Working range: 100μS..200mS, 0..50°C. Glass/Platinum
HD 8712: solution d'étalonnage conductibilité 12.880 μS/cm
à 25°C; 0,1 mol/I
HD 8714: solution d'étalonnage conductibilité 1.413 μS/cm à
25°C; 0,01 mol/I
TP 870: sonde de température pour immersion, capteur Pt100,
Ø 3 x 230 mm, domaine de mesure -50...+400°C
TP 870/C: sonde de température à contact, capteur Pt100, Ø 4
x 230 mm, domaine de mesure -50...400°C
TP 870/P: sonde de température à pointe, capteur Pt100, Ø 4
x 150 mm, domaine de mesure -50...+400°C
TP 870/A: sonde de température pour mesure de l'air, capteur
Pt100, Ø 4 x 230 mm, domaine de mesure -50...+250°C
9CPRS232: câble de connexion null-modem 9 poles femelle
SUB D pour sortie RS 232 C.
CE CONFORMITY
Safety EN61000-4-2, EN61010-1 level 3
Electrostatic
EN61000-4-2 LEVEL 3
discharge
Electric fast
EN61000-4-4 LEVEL 3
transients
Voltage variations EN61000-4-11
Electromagnetic
interference IEC1000-4-3
sucseptibility
Electromagnetic
interference EN55020 class B
emission
Miglioriamo in continuazione i nostri prodotti, ci riserviamo il diritto di apportare modifiche senza preavviso.
We improve continually our products and reserve us the right to modify them without prior notice.
Wir entwickeln unsere Produkte weiter und behalten uns das Recht der Änderung vor.
Nous améliorons continuellement nos produits, nous réservons le droit de le modifier sans préavis.
Mejoramos continuamente nuestros productos, nos reservamos el derecho de modificarlos sin previo aviso.
05/03