Liability; Safety Instructions; Installation; Tube Preparation - SOMFY Sonesse Ultra 50 RS485 Serie Manual

1.2 LIABILITY

attached Safety instructions
The motor must be installed by a motor and home automation professional, according
to instructions from Somfy and the regulations applicable in the country in which it is
commissioned.
instructions

Safety instructions

2. INSTALLATION

Instructions which must
installing the motor.
To optimize ultra quiet operation, the mechanical plays between motor, accessories, tube
2.1. INSTALLATION
2.1.1. Preparing the motor
47mm.
1) Fit the accessories required to integrate the motor in
• Fit the crown a, the motor wheel b and the stop wheel c
on the motor.
The stop wheel must be screwed with a torque ranging
between 1.5 and 1.8 Nm.

2.1.2. Tube preparation

1) Cut the roller tube to the required length, depending on
the motorised product.
Copyright © 2015 - 2017 Somfy SAS. All rights reserved.
operating and installation guide carefully.
1)
2)
1)
Images not contractually binding
EN
Safety
V
Up Down
Ø > 47 mm
c
a b
L1 = ...
L1
2)
51