Motor/Tube Assembly; Wiring - SOMFY Sonesse Ultra 50 RS485 Serie Manual

EN

2.1.3. Motor/tube assembly

1) Slide the motor into the roller tube.
•
motor wheel and not to the motor.
3) Slide the end cap into the roller tube and ensure that the
assembly is solid.
2.1.4. Installing the motor/tube assembly
The motorised product must not be compressed between the brackets.
bracket f and onto the motor bracket g
Ensure that the motor/tube assembly is secured onto
mounting when the roller blind reaches the lower end
limit position.
2) For star head motors, ensure the stop ring h in place.

2.2. WIRING

Cables which pass through a metal wall must be protected and isolated using a grommet
identical cable.
-
-
Neutral (N)
120V 60 Hz
100V 50/60 Hz
230V 50 Hz
220V 60 Hz
Neutral (N)
120V -60 Hz
52
Images not contractually binding
White Black
Blue Brown
US PIGTAIL CONNECTOR
White Black
1)
2)
3)
1)
g
2)
h
Earth ( )
Green
Yellow/Green
Earth ( )
Green
Copyright © 2015 - 2017 Somfy SAS. All rights reserved.
15 mm
5 mm
L1
20 mm
f
L1L2N
N
L2
L1