Phottix Strato TTL Manual De Instrucciones página 11

displayed on the transmitter.
2. Shoot and make additional changes as
needed.
Using High Speed Sync (HSS) and
Second Curtain Sync (SCS)
Pressing the HSS/SCS button will cycle
between HSS, SCS and standard operations.
HSS will allow faster shutter speeds to be
used when firing the flash. Shutter speeds
up to 1/8000 sec. can be achieved with
compatible cameras and flashes. SCS will fire
the flash at the end of an exposure not at the
beginning. This can be combined with longer
exposures for creative effects.
1. Press the HSS / SCS Mode Button to cycle
EN
between HSS, SCS and standard mode.
2. Set the camera mode and shutter speed.
Please Note:
At high shutter speeds the power of flashes is
greatly reduced.
S u p p o r t e d C a m e r a a n d F l a s h
Settings
The Phottix Strato T TL Trigger supports
functions that can be set in camera menus.
See your camera and flash manuals for full
details. Functions not available on a camera
body or flash cannot be used with the Strato
TTL system.
1. Depth-of Field Preview Button (Modeling
INSTRUCTION MANUAL
11