SWITCHING THE LCD TV ON/OFF
1. Press the STANDBY button on the front panel or on the remote control to switch the unit on or to
standby mode.
2. If the unit is in standby mode, press the STANDBY button to switch it on.
3. Press the STANDBY button again, the unit will revert to standby mode.
ADJUSTING THE VOLUME
Press the VOL+/- button to increase or decrease the volume.
t
VOLUME
USING MUTE
At any time, you can temporarily cut off the sound using the MUTE button.
1. Press the MUTE button and the sound cuts off.
2. Press the MUTE button again or press volume+ button to turn mute off.
SELECT INPUT SOURCE
You can select the input source in several ways.
Using the INPUT button on the front panel:
1. Press the INPUT button on the front panel,
the SOURCE menu will display on the screen.
2. Press the CH+/CH-button to select a
applicable input source, and then press the
VOLu
button to perform the selection.
Using the SOURCE button on the remote control:
1. Press the SOURCE button on the remote control,
the SOURCE menu will display on the screen.
2. Press the p
/q
source, and then press the ENTER button to perform
the selection.
CHOOSING A TV CHANNEL
Use the CH+/CH-button on the front panel, or the CH+/p
remote control.
Press the CH+ or CH+/p
Press the CH- or CH-/ q
Using 0-9 digital buttons
You can select the channel number directly by pressing 0 to 9 buttons.
BASIC OPERATION
button to select a applicable input
button to increase channel number.
button to decrease channel number.
u
36
/CH-/q
10
SOURCE
DTV
ATV
AV
SCART
YPBPR
HDMI
PC
USB
button on the