Steam Ironing; Vertical Ironing; Dry Ironing - Vaporella FOREVER 630 Manual De Instrucciones

The sound emitted on switching on your ap-
pliance and periodically during use, is due to
the water refilling system and is quite normal.
WARNING: When first operating steam, the-
re may be some drops of water mixed with
the steam due to temperature imbalances.
Direct the first jet of steam onto a rag.
2. IRON TEMPERATURE ADJUST-
MENT
Before ironing an item of clothing, always
check the symbols on its label, for the instruc-
tions provided by the manufacturer.
Check, based on the following table, the most
appropriate type of ironing:
High temperature – cotton, linen:
Set the iron temperature adjustment knob
•••
to the position
Medium temperature – wool, silk:
Set the iron temperature adjustment knob
••
to the position
Low temperature – synthetic, acrylic, ny-
lon, polyester:
Set the iron temperature adjustment knob
•
to the position
- Do not iron
- Steam ironing and steam treatment not
allowed
ATTENTION: For low temperature we do not
recommend the use of steam since water
could come out from the holes on the sole-
plate. For medium temperature alternate the
use of steam and dry ironing to avoid water
leaking from the holes on the soleplate.
Divide the laundry according to the symbols
on the garment labels or according to the
kind of fabric. Always start ironing with the
garments that require the lowest tempera-
ture, in order to reduce the waiting times
and avoid the risk of burning the fabrics.

3. STEAM IRONING

3.1 Make sure that chapter 1 has been comple-
ted and regulate the temperature of the iron
(10)-(11)-(12) as described in chapter 2
3.2 Wait for the "Steam Ready" indicator light
and "Iron Heating" indicator light to turn off.
3.3 Adjust the steam flow by turning the knob
All manuals and user guides at all-guides.com
in a clockwise direction to increase the jet of
steam (13). Turning it in an anticlockwise di-
rection reduces the steam flow.
3.4 Press the steam button (14) on the iron to
make steam come out of the holes on the pla-
te. Releasing the button, the flow stops. Pro-
ceed to iron the garments.
When first using the steam, there may be
some drops of water leaking out of the pla-
te, this is due to imperfect thermal stabiliza-
tion. We therefore recommend that the first
jet of steam be directed onto a cloth (clean
rag).
3.5
655 Pro / Forever 650
jet of steam move the button forward (15).
The steam will continue to come out even
when the button is released. To interrupt the
supply, move the button backward (15).
Only for Vaporella Forever 630
tinuous jet of steam, press and move the but-
ton backwards
(16). The steam will continue to come out
even when the button is released. To interrupt
the supply, move the steam button forward
(16).
The indicator lights "Iron heating" and
"Steam ready" turn on and off during use.
This indicates that the electrical resistor has
started to work to keep the pressure of the
boiler steady. This is a normal occurrence,
and it is therefore possible to continue iro-
ning.
ATTENTION: Do not place the hot iron on
any surface. Vaporella is equipped with an
iron rest mat with soft non-slip inserts desi-
gned to resist high temperatures.

4. VERTICAL IRONING

It is possible to use the iron vertically to remo-
ve creases from fabrics and/or to freshen up
the
odours.
Hold the iron vertically, push the steam button
(14) and touch the fabric slightly with the so-
leplate, if the type of fabrics allows it.

5. DRY IRONING

5.1 Make sure that chapter 1 has been comple-
ted, leaving the boiler switch off and regulate
the temperature of the iron (10)-(11)-(12) as
| 22 |
Solo per Vaporella Forever 625 / 635 /
To have a continuous
fibres, eliminating
to have a con-
possible residual