Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
electronic devices.
- With overload protector, the power strip turns off automati-
cally once the load power exceeds the rated power.
5. Operation Instruction
1. Plug in power cord of surge protector and AC outlet.
2. USB SURGE PROTECTOR can be switched on by
pressing "ON/OFF Switch" and the LED light will be turned on
to indicate proper connection.
3. Plug your USB rechargeable device into USB port, it starts
to charge automatically.
4. Plug in your electric appliance to 4 EU standard sockets for
normal use.
5. Press "ON/OFF" Switch to turn off the power of 4 outlets
and 4 USB charging ports.
6. Notes
Please check that Phone, iPad, iPod, smart phone and other
devices are used in accordance to your device's manual
instruction. We are not responsible for any damage caused by
incorrect or reckless operation.
7. Take Care Your Surge Protector
1. Do not apply external force on the power cord.
2. Always push the plug all the way into the power outlet to
avoid electric shock.
3. User must hold both sides of the plug firmly when removing
the plug from power mains.
4. Do not unplug by pulling the power cord.
5. Do not connect a binded power cord to the power supply.
6. Do not place the power cord or device near heating
element.
7. Do not bend the blade or pins of the plug.
8. If there is any strange sound, smoke or odor, pull off the
cable immediately.
9. Do not disassemble. (It may cause fire or electric shock.)
10. Do not put any sharp objects into the venting hole of the
EN-2
Publicidad
