Assembly Steps; Product Functions - Byox B63 Instrucciones De Uso

33.Take care of the people and pets around you, while using the product.
34. Be careful in order to avoid collisions with other objects!
35.You must teach your child to always ride the tricycle only forwards, in the direction of movement, without turning back,
while in motion.
36.The child must not jump with the tricycle from curbs or other higher parts, as well as bumping into them.
37.Do not use the tricycle in rainy days.
38.The use of the tricycle in rainy/ wet weather may lead to damages or rust to the product. Keep the product away from
water.
PARTS OF THE TRICYCLE
Before assembly of the tricycle, take all the parts out of the packing and check if all of the bellow listed are present. Keep the
packages until you finish the assembly completely.
SEE FIGURE PD with the parts: 1. Canopy; 2. Frame; 3. Parent control handle; 4. Rear wheels; 5. Front wheel with front
fork; 6. Rear toy basket; 7. Seat; 8. Base of the seat; 9. Foot rests; 10. Safety board; 11. Screw for fixing the seat; 12.
Handlebar; 13. Cup holder; 14. Tool to fix the handlebar; 15. Hand grips; 16. Pedals; 17. Mudguard;

ASSEMBLY STEPS

1.Step 1 –Figure 1: Take one of the rear wheels with the attached to it rear axle. Slide the axle through the opening in the
rear brake and press forward to fix the wheel. Attach and the other rear wheel the same way.
2.Step 2 – Figures 2 to 4: Slide the front fork with the front wheel in the opening in the frame. Put the steering wheel on the
tip of the front fork and push down. Align the openings in the front fork with those of the handlebar, which are designated for
the fixing screw. Slide the screw through them and fix it using the provided tool. Check if the assembly is successful. Rotate
the steering wheel to the left and right. If it controls the front fork and the fork does not fall out of the frame, then you have
assembled the parts correctly.
3.Step 3 – Figures 5 to 8: Place the base of the seat on the frame. Take the rear part of the seat and attach to it the
backrest. Place the seat on the base and fix them using the screw.
4.Степ 4 – Figures 9 to 11 Insert the rear parts of the safety board rails in the holders on the backrest. Slide the front parts
of the rails through the opening in the seat cover. Connect both of the rails to each other. Then attach the canopy to its
designated holders on the backrest.
5.Step 5 – Figure 12: Place the rear basket on the tricycle's rear frame. Fix with the screw attached to it.
6.Step 6 – Figures 13 to 14: Attach the parent control handle to the short tube in the rear part of the frame. Use the red
clamp to fix it.
7.Step 7 – Figures 15 to 16: Attach the foot rests to the front fork. Then attach the cup holder to the holder on the frame
below the handlebar.

PRODUCT FUNCTIONS

1.Rotating seat: In order to rotate the seat in position with the child facing you or the road, loosen the screw in the base of
the seat. Rotate the seat and put it in the needed position. Then tighten the screw again to fix it.
2.Detachable canopy, safety board and backrest: Remove the canopy first from the holders on the backrest. Then press
the button in the front part of the safety board to unlock it and separate its rails. Press the buttons on the holders on the
backrest and detach both of the rails from the holders. Then detach the backrest from the seat.
3.Detachable parent push (control) handle: Open the clamp and press the fixing button in the base of the handle. Lift the
handle and detach it from the short tube.
4.Free wheel button of the front wheel: It is attached to the front wheel. Push the button back. This way if your child
rotates the pedals, it will not affect the movement of the front wheel. Turn the button forward. In this case if your child rotates
the pedals, it will affect the movement of the front wheel.
5.Foldable handlebar: Press the side buttons of the handlebar and fold it forward.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Cleaning:
•Clean with soft dry cloth. Do not use aggressive cleaning detergents - alcohol or bleach – based ones, or such, containing
abrasive particles.
•Do not spray water or other liquids directly on the tricycle during play or cleaning. This way you will avoid the risk of damage
of the tricycle due to rush on the metal parts and disturbance in the stability of the connections.
•Clean the tires regularly from sand or dust.
•Keep the tricycle clean.
2. Maintenance and storage:
•Before each use of the tricycle, check carefully the working order of all parts and connections:
-The screws must be tightened well;
-The wheels and handlebar must be strong and fixed stably;
-The wheels must move freely.
•You must not use the tricycle if you find that there are any loose, worn or damaged parts.
•The long use of the product may lead to loosening of the screws and nuts. Please, make sure that all nuts and screws are
9