Maxon 299025-01 Instrucciones página 6

INSTRUCTIONS FOR INSTALLING SURFACE MOUNT LIGHT KIT
(2 RED & WHITE LED LIGHTS WITH COMBINED STOP, TURN, TAILLIGHT & BACKUP)
(2 RED & WHITE LED LIGHTS WITH COMBINED STOP, TURN, TAILLIGHT & BACKUP,
NOTE: Instructions for installation of 4-light surface mount kits, begin on Sheet 10.
1. Unbolt the main frame cover by removing
three 5/16" hex nuts (FIG. 6-1). Remove main
frame cover.
2. Remove two 1-1/4" and four 1/4"
plastic plugs from access holes in
the main frame cover (FIG. 6-2).
LIFT CORPORATION Sht. 6 of 36 DSG#
5/16" HEX NUTS
(3 PLACES)
P/N 299025-01
&
12/24V)
P/N 299025-1224
UNBOLTING MAIN FRAME COVER
1/4" PLASTIC PLUGS
1-1/4" PLASTIC PLUGS
REMOVING PLASTIC PLUGS (2 LIGHTS)
M-18-07
Rev. A - Date: 08/04/21
MAIN FRAME
COVER
FIG. 6-1
(4 PLACES)
(2 PLACES)
FIG. 6-2