Vitrifrigo SCP Manual De Instalación, Uso Y Asistencia página 8

Place the refrigerator on a horizontal surface and use the adjustable feet to level it, if needed.
EN
When choosing the position of the refrigerator, remember that a gap of at least 50 mm (2 in.) is required
between the back panel of the refrigerator and any wall in order to allow the warm air from condensation
to escape.
We recommend leaving a gap of the same size 50 mm (2 in.) between the top part of the refrigerator
and any surface above it.
As far as any space requirements at the sides of the refrigerator are concerned, there are no specific
instructions.
Seite 8 von 72 022129 BA BKE SCP EN, DE, FR, ES, IT