Uline IGNITION 2.0 Instrucciones De Montaje página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Figure 2
Figure 3
Figure 4
PAGE 2 OF 9
ASSEMBLY INSTRUCTIONS CONTINUED
Lever
2. Position back support in slot between bottom of seat
cushion and mechanism. (See Figure 2)
3. Align holes and use three screws to attach back
support to mechanism. (See Figure 3)
NOTE: Use a 9/16" wrench to tighten screws.
4. Unlock bracket to install armrest – lever must be
perpendicular to bracket. Slide armrest into bracket
and push lever in toward armrest to lock. Repeat on
opposite side. (See Figure 4)
0521 IH-7057

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

H -7057

Tabla de contenido