Home Decorators Collection Sutton Manual De Instrucciones página 7

INSTALLATION & ASSEMBLY (cont.):
8. Install up to a 100 watt Light Bulb or Listed SBCFL (Self-
Ballasted Compact Fluorescent Lamp [not provided]) in the
socket of the Main Fixture Body. Do not exceed a 100 watt
incandescent light bulb, or a 26 watt SBCFL (Fig. 3).
9. Slide the Glass Shade into the Fixture Body and turn it
clockwise until secure (Fig. 3).
10. Using an exterior rubber sealant, caulk around the edge of
the upper 2/3s of the Wall Plate.
11. Leave the bottom 1/3 unsealed to allow drainage of any
water that might leak into the enclosure.
Fixture Body
Incandescent Light Bulb
Glass Shade
Fig. 3
Page 7