Before Using The Water Dispenser; Using The Ice Maker; Transportation Of The Product - Beko BFFD3624SS Manual Del Usuario

Installation

3.12 Before using the water dispenser

The water system connections should be made
tools.
only with water. Do not attempt to connect to
bled out of the system before the intial use.
To remove the air in the line, place a container
beneath the water dispenser nozzle and depress
the dispenser paddle for 1-2 minutes until only
water comes out.
consumed.It will take approximately 12 hours
before the water being dispensed cools down to
refrigerated temperatures.
paddle before removing your container, as this
will reduce the potential for dripping into the
dispenser tray.

3.12.1 Using the Ice Maker

The ice maker is not turned on from the factory.
Freezer Temp Set key for 3 seconds, or until the no
ice icon ( ) disappears in the display.It will take
approximately 1-2 days for the ice bin to fill with
ice.If a power outage occurs while the refrigerator
is running, the ice cubes may partially melt and
then stick together when the re-freeze. If the power
outage is prolonged, the ice cubes may turn into
water, causing leakage. If such a problem occurs.
stick together if they are left in the bin for too
long.

3.13 Transportation of the product

1. Unplug the product before transporting it.
2. Remove water connections.
3. Secure the shelves, accessories, crisper and etc. in
the refrigerator by adhesive tape before repackaging it.
C
Packaging must be tied with thick tapes or
strong strips and the rules of transportation
printed on the package must be followed.
A
WARNING:
are dangerous for the children. Keep
packaging materials in a safe place away
from reach of the children.
no ıce icon
16 / 29 EN
Packaging materials
Freezer Temp Set
ıce on key
Refrigerator / User Manual