For Dual Adjustment Models - Fagor FD281NF Manual De Instrucciones

Ocultar thumbs Ver también para FD281NF:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
All manuals and user guides at all-guides.com
10.If your refrigerator has self-closing devices on
the central hinge area of the doors, remove
them, turn them and place them on the opposite
door and on the opposite side. The fixing points
for the screws will be lightly marked in the
door turning axis area.
11.Cover the holes left visible on the door after the
self-closing devices have been changed to the other side, using the caps in the
refrigerator documentation bag. Any flash caused by the screws should firstly be
removed.
12.Proceed to mount the doors following the disassembly procedure but in reverse
order.
BEFORE SWITCHING THE REFRIGERATOR ON:
➭ Clean the inside with warm water and bicarbonate of soda. Rinse and dry
carefully.
➭ Wait for 2 hours before starting, to ensure that the motor lubricants have
stabilised.
➭ If the refrigerator has been switched off, wait 4 hours after restarting before
placing food inside.
4. REFRIGERATOR OPERATION AND USE FOR
DUAL ADJUSTMENT MODELS
TEMPERATURE REGULATION:
➭ In normal conditions, the recommended approximate
temperature is 4ºC in the refrigerator and about –19ºC in the
freezer.
➭ To regulate the temperature, use the temperature selection
controls: temperatures are indicated in ºC.
WARNING: The inside refrigerator temperature depends on:
Room temperature.
The location of the refrigerator.
Door-opening frequency
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido