auna Amp-218 BT Manual Del Usuario página 16

EN
16
BT OPERATION
External devices which have a built-in BT feature can be connected to this
amplifier wirelessly to play through the amplifier's speakers. If your amp
is connected to speakers, you will hear audible tones which will help for
connecting.
1. At first be sure that the amplifier is powered on, and turn the volume to
low. Please remember to connect the BT Antenna at the back panel for
better receiving signal.
2. Press the BT/Line button switch in on the front panel, you will hear
the voice „POWER ON" and also „PAIRING", and then the unit is
automatically ready to pair with your external device.
3. Turn on the BT of your external device.
4. Search for available BT devices and make sure to be within range of
your amp, and wait for your device to select "AMP-218BT" on the pairing
devices lists of BT networks.
5. Once connecting you will hear a voice say, "Your Device is Connected",
then the BT pairing is successful and your have established a BT
connection.
6. You can now play music on your external device through the amplifier.