ASROCK A75M Manual Del Usuario página 27

All manuals and user guides at all-guides.com
2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
®
2.11 Installing Windows
XP 64-bit With RAID Functions
®
If you want to install Windows
bit on your SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
®
2.12 Installing Windows
XP 64-bit Without RAID Functions
®
If you want to install Windows 7 / 7 64-bit / Vista
OS on your SATA3 HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.12.1 Installing Windows
®
If you want to install Windows XP / XP 64-bit on your SATA3 HDDs without RAID
functions, please follow below steps.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Confi guration.
B. Set the "SATA Mode" option to [IDE].
®
STEP 2: Install Windows XP / XP 64-bit OS on your system.
ASRock A75M Motherboard
TM
7 / 7 64-bit / Vista / Vista
TM TM
7 / 7 64-bit / Vista / Vista 64-bit / XP / XP 64-
TM
7 / 7 64-bit / Vista / Vista
TM TM
/ Vista 64-bit / XP / XP 64-bit
®
XP / XP 64-bit Without RAID Functions
Advanced screen Storage
TM
64-bit / XP /
TM
64-bit / XP /
27