View Of The Control Panel; Battery Box ( Optional ) - TEC Sirius Manual Del Usuario

PRELIMINARY
V C P
IEW OF THE ONTROL ANEL
Mains power LED
Battery power LED
Load on bypass LED
Stand-by / alarm LED
F1, F2, F3, F4
= FUNCTION KEYS. The function of each key is indicated at the bottom of the display and varies
according to the menu used.
All manuals and user guides at all-guides.com
Battery low LED
ECO mode LED
Graphic display
59
PRELIMINARY
B B ( )
ATTERY OX OPTIONAL
THE BATTERY BOX IS AN OPTIONAL ACCESSORY PROVIDED FOR THIS RANGE OF UPS (SAME SIZE AND
AESTHETIC DESIGN).
The Battery Box contains batteries that increase the operating time of the UPS during prolonged black-outs. The number of
batteries contained in it will vary according to the type of UPS to which the Battery Box is to be installed. The utmost attention
must be paid to ensure that the battery voltage of the Battery Box corresponds to that supported by the UPS.
Additional Battery Boxes may be connected in a chain to obtain the desired autonomy time during a power failure.
This series of Battery Box contains two separate strings of batteries, one with a positive voltage and the other with a negative
voltage with respect to the neutral terminal (N).
The basic diagram for the Battery Box is shown here below.
BT06-480A--
Rated voltage
Weight
Width x Depth x Height
(1)
The "-" symbol stands for an alphanumeric code for in-house use
(1) (1)
BT06-480M--
240 + 240 Vdc 240 + 240 Vdc
150Kg 270Kg
320 x 840 x 930 mm
60