DeLonghi DEDICA ARTE EC885 Manual Del Usuario página 10

MAKING CAPPUCCINO
5. Place the milk pitcher
under the steam wand
(A11): immerse
frother and turn the dial
to the position.
9. Once the desired temperature is reached, turn the steam
knob off and wait till steam stops completely before re-
moving the milk pitcher
10. Pour the frothed milk into the cups containing the espresso
coffee prepared previously. The cappuccino is ready.
Sweeten to taste and if desired, sprinkle the froth with a
little cocoa powder.
Cleaning the steam wand
1. After every use, remove with
a soft damp cloth any milk
residues from the steam
wand. For perfect cleaning,
we recommend Eco Multi-
Clean: it ensures hygiene by
removing milk proteins and
fats and can be used to clean
the whole machine.
2. Use the steam for a deeper
cleaning.
3. Wait that the steam wand
cool down and open the hole
of the nozzle with the clean-
ing needle (C7).
5
6. To make the froth, put
the nozzle on the surface
of the milk and air will
the
catch by the mixing of
milk and steam.
6
7. Keep the steam nozzle just
on the surface, careful not
to make big bubbles by
letting too much air in.
Please note:
• To prepare more than one cappuccino, first make all the
coffees then at the end prepare the frothed milk for all
the cappuccinos.
• To exit the steam function, press any button. The
and lights flash to indicate that the Cooling Cycle
is required.
• You should not deliver steam for more
than 60 seconds.
6.1 Cooling Cycle
After having used the steam wand and exited the steam func-
tion, the two lights
chine will flash simultaneously indicating that the boiler needs
to be cooled off in order to reach the precise espresso brewing
temperature. Simply proceed as follows:
1
• place a container under
the cappuccino maker;
1. open the steam dial to de-
liver steam and hot water:
the light flashes;
2
1. when both lights (
and ) flash the boi-
ler is cool: close the steam
dial. (when the boiler is
cool, the pump stops ope-
rating and no more water
3
is delivered).
The coffee maker is now ready
for use.
9
7
8. Insert the steam nozzle
just under the milk: this
create a vortex.
and on the front of the ma-
8
1
2