AND BA-T Serie Guia De Inicio Rapido página 9

3. Installation Considerations, Preparation and Precautions
Prepare the following installation conditions in order to bring out the full performance of the balance.
Install the balance in an environment where the temperature and humidity are not excessive. The
best operating temperature is about 20°C ±2°C at about 45% to 60% RH relative humidity.
Install the balance where it is free of dust.
The weighing table should be solid. (An anti-vibration table or stone table is ideal)
Place the balance on a horizontal table, and make sure that it is not tilted.
Install the balance in a stable location, avoiding vibration and shock. Corners of rooms on the first
floor are best, as they are less prone to vibration.
Install the balance where it is not affected by heaters or air conditioners.
Install the balance where it is not exposed to direct sunlight.
Install the balance away from equipment which produces
magnetic fields.
Level the weighing unit with the leveling feet and bubble spirit
level. Refer to "3.1. How to adjust the level of the balance".
Be sure to warm up the balance before use for at least an hour, or at least four hours for BA-6TE /
BA-6DTE, with the AC adapter connected to the power supply.
Perform sensitivity adjustment of the balance before using it for the first time or after having moved it
to another location so that accurate weighing can be performed. For details, refer to the detailed
instruction manual listed in "1.1 Detailed manuals".
Caution
Do not install the balance where flammable or corrosive gas is present.
3.1. How to adjust the level of the balance
Bubble
spirit level
The balance is level The balance is tilted
(Correct weighing) (Inaccurate weighing).
Level the balance by adjusting the leveling feet so that the bubble of the bubble spirit level is centered
in the red circle.
When the bubble is off to the left.
Turn the leveling foot on the front right in the
clockwise direction.
When the bubble is off to the backward
position.
Turn both leveling feet on the front in the
clockwise direction at the same time.
EN
Up
Leveling
foot
Down
Red circle
When the bubble is off to the right.
Turn the leveling foot on the front left in the
clockwise direction.
When the bubble is off to the forward
position.
Turn both leveling feet on the front in the counter
clockwise direction at the same time.
9
Leveling foot
Bubble spirit level
Bubble
Down
Leveling
foot
Up