ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 2)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 5)
This motherboard
provides a 8-pin ATX 12V
8
5
power connector. To use a
4-pin ATX power supply,
4
1
please plug it along Pin 1
and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
This header is used to connect
1
Addressable LED extension cable
GND
which allows users to choose
DO_ADDR
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
* Please refer to page 28 for
further instructions on this
header.
H610M-ITX/ac
23